Asus P5G41C-M LX User Manual page 36

3. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
P5G41C-M LX
P5G41C-M LX ATX power connectors
• We recommend that you use an ATX 12V Specification 2.0-compliant power supply unit
• If you intend to use a PSU with 20-pin and 4-pin power plugs, ensure that the 20-pin
• DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the system will
• We recommend that you use a PSU with higher power output when configuring a
• If you are uncertain about the minimum power supply requirement for your system,
1-26
ATX12V
(PSU) with a minimum of 400W power rating. This PSU type has 24-pin and 4-pin power
plugs.
power plug can provide at least 15 A on +12 V and that the PSU has a minimum power
rating of 400W. The system may become unstable or may not boot up if the power is
inadequate.
not boot up.
system with more power-consuming devices or when you intend to install additional
devices. The system may become unstable or may not boot up if the power is
inadequate.
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
EATXPWR
+3 Volts GND
+12 Volts +5 Volts
+12 Volts +5 Volts
+5V Standby +5 Volts
Power OK -5 Volts
GND GND
PIN 1
+5 Volts GND
GND GND
+5 Volts PSON#
GND GND
+3 Volts -12 Volts
+3 Volts +3 Volts
PIN 1
Chapter 1: Product introduction