2.8
G.P. Diagnosis card installation
2.8.1
G.P. Diagnosis card layout
LED 0 and 1
Power Switch. Press
to turn ON or OFF the
computer.
Reset Button.
Press to restart the
computer.
Card connector
2.8.2
Installing G.P. Diagnosis card
Make sure to turn off the power supply unit before instaling the diagnosis card to
avoid electrical shock hazard.
1.
Locate the TPM connector (20-1
pin TPM) on the motherboard (Refer
to page 2-33 for exact connector
location).
2.
With the LEDs of the diagnosis
card facing to the DIMM sockets,
align the card connector with the
TPM connector and press firmly
until the card sits on the connector
completely.
ASUS P5E64 WS Evolution
2-37