Hardware Monitor - Asus P5E64 WS Pro Installation Manual

Power On By PS/2 Keyboard [Disabled]
Allows you to disable the Power On by PS/2 keyboard function or set specific keys
on the PS/2 keyboard to turn on the system. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]
Energy Star 4.0C [Disabled]
Allows you to enable or disable the Energy Star 4.0C support. When enabled, the
PS/2 and USB device wake-up function under S3 state and the Marvell LAN, PS/2
and USB device wake-up function under S4/S5 state will not be supported, saving
more energy to pass the Energy Star 4.0C regulations.
Configuration options: [Disabled] [Enabled]
4.6.6

Hardware Monitor

Hardware Monitor
CPU Temperature
MB Temperature
CPU Fan Speed
Chassis Fan 1 Speed
Chassis Fan 2 Speed
Chassis Fan 3 Speed
Chassis Fan 4 Speed
CPU Voltage
3.3V Voltage
5V Voltage
12V Voltage
ASUS Advanced Q-Fan Control
CPU Q-Fan Control
Chassis Q-Fan Profile
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. Select [Ignored] if you do not wish to display the detected
temperatures.
CPU Fan Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows [N/A].
Chassis Fan 1/2/3/4 Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the chassis
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows [N/A].
ASUS P5E64 WS Evolution
BIOS SETUP UTILITY
Power
[47ºC/116.5ºF]
[32ºC/89.5ºF]
[4500RPM]
[N/A]
[N/A]
[N/A] [N/A]
[N/A] [N/A]
[ 1.288V]
[ 3.296V]
[ 5.094V]
[11.616V]
[Disabled]
[Disabled]
CPU Temperature
Select Screen
Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
4-33