Warnings And Cautions - HP Xw4550 - Workstation - 2 GB RAM Installation Manual

Warnings and cautions

WARNING!
presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists.
To reduce the risk of injury from a hot component, allow the surface to cool before touching.
WARNING!
presence of an electrical shock hazard. To reduce the risk of injury from electrical shock, do not open
any enclosed area.
WARNING!
— Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
— Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
— Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
WARNING!
workstation, setup, posture, and health and work habits for computer users, and provides important
electrical and mechanical safety information. This guide is located on the Web at
ergo and/or on the documentation CD if one is included with the product.
WARNING!
be lifted by two persons to avoid personal injury due to product weight.
CAUTION:
beginning these procedures, be sure you are discharged of static electricity by briefly touching a
grounded metal object.
CAUTION:
— Installing a processor incorrectly can damage the system board. Have an HP authorized reseller or
service provider install the processor. If you plan to install it yourself, read all of the instructions carefully
before you begin.
— Failure to follow the workstation preparation instructions and these result in an improperly installed
processor, causing extensive system damage.
— Processor socket pins are delicate and bend easily. Use extreme care when placing the processor
in the socket.
2 SATA optical drive installation
Any surface or area of the equipment marked with these symbols indicates the
Any surface or area of the equipment marked with these symbols indicates the
To reduce the risk of electric shock or damage to your equipment:
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
If a product is shipped in packaging marked with this symbol,
Static electricity can damage the electronic components of the workstation. Before
Observe the following cautions when removing or replacing a processor:
http://www.hp.com/
, the product must always
ENWW