HP Workstation x1000 User Manual page 7

ladoga.bk : ladga-us.fb4 Page 5 Friday, January 15, 1999 3:28 PM
Video Input Connector
Video Input Connector
USB Connectors
(Some Models Only)
Connecting Additional Devices to Your Monitor
The following diagram indicates additional devices that can be connected.
Please refer to your
Quick Setup Guide
before connecting any additional devices.
1
2
Connecting Two Computers
Your LCD monitor has two signal connectors located on the rear panel (see
"Selecting Video Input" on page 11). This enables you to connect your monitor
to two computers at the same time.
USB Connectors (Models A & E Only)
A USB-Hub is integrated in the base of your monitor stand. USB connectors
automate peripheral connection by using plug and play install procedures.
Connect your USB device to your computer as indicated in the
. Connect USB compatible plug and play devices such as a keyboard,
Guide
mouse, joystick or digital USB camera (if supported by your computer) to any
of the four remaining downstream connectors.
Connecting Headphones/Speakers and a Microphone
Your monitor provides headphone/speaker and microphone sockets on the
rear panel.
HP 18.1" LCD Color Monitor User's Guide
Connecting Additional Devices to Your Monitor
(Step 3 - Connecting the Cables)
Microphone In
jack
Headphone/Speaker
In jack
Headphone/Speaker
Microphone Out
Out Jack
jack
Quick Setup
English 5