HP Workstation x1000 User Manual page 14

ladoga.bk : ladga-us.fb4 Page 12 Friday, January 15, 1999 3:28 PM
NOTE
HP 18.1" LCD Color Monitor User's Guide
Configuring Your Monitor
Selecting Input Priority
When your monitor is connected to two computers, you will need to give
priority to one computer. This computer is selected every time you switch on
your monitor and when using auto selection (see "Auto Selection" on page
11). To choose which computer has priority:
1 : 2
1 Select from the main menu, then press
sub menu.
2 Select INPUT 1 or INPUT 2 using the adjustment control, then press
save your selection and return to the OSD main menu.
The displayed image will disappear for a few seconds. The message Auto Video
Input Selection Priority to 1 (or 2 depending on your selection) appears while the
monitor makes your selection.
Input 1 and Input 2 correspond to connectors 1 and 2 on the rear of the monitor.
Obtaining Information
To obtain information about your monitor, select one of the following main
menu items:
Menu Item Select to...
SERIAL NUMBER Display the serial number of your monitor
BACKLIGHT TIME Display the estimated life span of the monitor's backlight
MODE INFO Display the video mode currently in use
Display the preset modes and user modes available
1. Contains a record of any adjustments that the user makes in the main menu system.
2. Standard configurations pre-loaded at the factory.
12 English
to enter the INPUT PRIORITY
to
1
2