HP Workstation x1000 User Manual page 13

ladoga.bk : ladga-us.fb4 Page 11 Friday, January 15, 1999 3:28 PM
HP 18.1" LCD Color Monitor User's Guide
Configuring Your Monitor
Selecting Video Input
The rear of your monitor has two video input connectors to connect one or
two computers (see "Connecting Two Computers, on page 5"). The Video
Input LEDs located on the front panel of the monitor indicate which
connector is receiving input. Use either auto or manual selection to select the
appropriate input option.
Auto Selection
When you first connect your computer to the monitor, the monitor
automatically selects one of the following combinations, depending on which
connector is receiving input.
1 1
AUTO 2 AUTO 2
If two operational computers are connected, the monitor automatically selects
the computer that has input priority (see "Selecting Input Priority" on page
12). If the monitor detects no input from the computer with priority, it
automatically searches for a signal from the second computer.
Manual Selection
To manually select an input channel, use the video input button located
underneath the front panel of the monitor.
If you want to receive a signal from a computer connected to 1 select the
following.
1
AUTO 2
If you want to receive a signal from a computer connected to select the
2
following:
1
AUTO 2
If two operational computers are connected, the monitor is only able to detect
input from the computer connected to the connector selected.
NOTE
To return to auto selection at any time select AUTO.
English 11