Troubleshooting Tree; Verify Physical Connections And Cycle Power First - HP Visualization Center sv6 Troubleshooting Manual

troubleshooting your hp visualization center sv6

troubleshooting tree

Figure 1-2
troubleshooting tree
These topics are arranged in the relative order of things that MUST
happen for everything to work correctly up to that point. Start at the
subheading where you think you're having problems and continue down
the list to try to methodically narrow down the problem.
In some cases, going through these steps will resolve the problem. In
other cases, the tree will suggest that hardware components be replaced
or that existing documentation for that component be used to do further
trouble shooting.

1. Verify Physical Connections and Cycle Power First

• Because the sv6 solution requires so many cables, there is a high
possibility of the cables slipping out, or being attached incorrectly.
Check for complete attachment of cables.
Check for correct cabling on each J6000; use this connection
diagram:
J6000 Connection Diagram
16 Chapter 1