Accessory Board Slots - HP Vectra XE310 Technical Reference Manual

System Features
Processors
The XE310 Series 2 is equipped with either a single Socket 370 Intel Celeron or socket 370 Intel Pentium
III processor. The processor is connected to the system board through a Plastic Pin Grid Array (PPGA)
370 Socket. A heat sink covers the processor to prevent it from overheating. The reduction in size
achieved by the Socket 370 Celeron is due to the integration of the L2 cache on the processor die. Like
the Celeron processor, the Pentium III comes in a 370-pin socket (PGA370) package.
To find out more about Socket 370 Celeron and Pentium III technology, refer to the Technical Reference
Manual - PC Technology.

Accessory Board Slots

The XE310 Series 2 has three PCI accessory board slots.
PCI Slot Numbers
Your PC uses logical slot numbers in the BIOS Setup program. You need to know these logical slot
numbers if you want to change the PCI slot configuration in the Setup program. PCI slot numbers are
also indicated on the system board itself.
16 product description
HP XE310 Series 2 PCI Mapping Table
Bus Device
0 0
0 2
0 8
0 30
0 31
0 31
0 31
0 31
0 31
1 2
1 1
1 0
PCI Device
82815 Processor to I/O controller
82815 Graphics controller
ICH2: LAN controller
ICH2: Hub interface to PCI bridge
ICH2: PCI to LPC bridge
ICH2: IDE controller
ICH2: USB controller
ICH2: SMBus controller
ICH2: AC97 audio controller
PCI slot 1
PCI slot 2
PCI slot 3
#
Slot
1
2
3