Removing And Replacing The Cover; Removing The Cover - HP Vectra VE 6/xxx - 8 User Manual

WARNING
2 How to Install Accessories in Your PC

Removing and Replacing the Cover

Removing and Replacing the Cover
For your safety, never remove the PC's cover without first removing
the power cord from the power outlet, and any connection to a
telecommunications network. Always replace the cover on the PC
before switching on the PC again.

Removing the Cover

1 Switch off the display and PC.
2 Disconnect all power cords and any telecommunications cables.
3 Unscrew the three thumb screws at the back of the PC. If it is the
first time you are removing the cover, you will probably need to use
a screwdriver to loosen the screws.
4 While standing at the back of the PC, slide the cover towards you by
about 15 mm (1/2 - 3/4 inch) and then lift it off the PC chassis.
Step 4
20 English
Step 3