Removal and replacement procedures
10. Flex the inside edges of the top edge 1, the left and right sides 2, and the bottom edge of the display bezel
3 until the bezel disengages from the display enclosure.
11. Remove the display bezel 4. The display bezel without a webcam module is available using spare part number
487285-001. The display bezel with a webcam module is available using 487286-001.
12. To replace the display inverter, lift the inverter 1 from the clips in the display enclosure as far as the display
panel cable and the backlight cable will allow.
13. Disconnect the display panel cable 2 and the backlight cable 3 from the display inverter. The display inverter
is available using spare part number 486736-001.
4–30
Maintenance and Service Guide