Display Assembly - Compaq Presario CQ41-200 - Notebook PC Maintenance And Service Manual

Display assembly

✎
The display assembly spare part kit includes two WLAN antenna transceivers and cables, webcam (select models
only), microphone, nameplate, and logo.
Description
14.1-in WXGA BrightView display with a microphone for models with discrete and UMA graphics
subsystems
14.1-in WXGA BrightView display with a webcam/microphone for models with discrete and UMA
graphics subsystems
Before removing the display assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
6. Remove the following components:
a. Hard drive cover (see
b. Mini Card compartment cover (see
c. Optical drive (see
d. Keyboard (see
e. Keyboard cover (see
f. Speaker assembly (see
Maintenance and Service Guide
"Battery" on page
"Hard drive" on page
"RTC battery" on page
"Optical drive" on page 4-20
"Keyboard" on page 4-21)
"Keyboard cover" on page
"Speaker assembly" on page
4-7).
4-8)
4-12)
4-23)
4-25)
Removal and replacement procedures
Spare part number
580763-001
580766-001
"WLAN module" on page 4-14).
4–27