Specifying All Images At Once; Choosing Images Individually - Canon PowerShot A1400 User Manual

• Protected images on a memory card will be erased if you format the
card (= 82, 83).
• Protected images cannot be erased using the camera's erasure function. To
erase them this way, first cancel protection.

Choosing Images Individually

1
Choose [Select].
z z Following step 2 in "Using the Menu"
(= 72), choose [Select] and press the
<m> button.
2
Choose an image.
z z Press the <q><r> buttons to choose an
image, and then press the <m> button.
[ ] is displayed.
z z To cancel selection, press the <m>
button again. [
z z Repeat this process to specify other
images.
3
Protect the image.
z z Press the <n> button. A
confirmation message is displayed.
z z Press the <q><r> buttons to choose
[OK], and then press the <m> button.
• Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
] is no longer displayed.

Specifying All Images at Once

1
Choose [Select All Images].
z z Following step 2 in "Using the Menu"
(= 72), choose [Select All Images] and
press the <m> button.
2
Protect the images.
z z Press the <o><p> buttons to choose
[Protect], and then press the <m>
button.
• To cancel protection for groups of images, choose [Unlock] in step 2.
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Smart Auto
Mode
3
Other Shooting
Modes
4
P Mode
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
73