Initial Preparations; Charging The Battery; Attaching The Strap; Holding The Camera - Canon PowerShot A1400 User Manual

Initial Preparations

Prepare for shooting as follows.

Attaching the Strap

z z Thread the end of the strap through the
strap hole ( ), and then pull the other
end of the strap through the loop on the
threaded end ( ).

Holding the Camera

z z Place the strap around your wrist.
z z When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. Do not rest
your fingers on the flash.
A2600

Charging the Battery

Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
1
Insert the battery.
z z After aligning the  marks on the battery
and charger, insert the battery by pushing
it in ( ) and down ( ).
2
Charge the battery.
z z CB-2LF: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
z z CB-2LFE: Plug the power cord into the
CB-2LF
charger, then plug the other end into a
power outlet.
X X The charging lamp turns orange and
charging begins.
X X When charging is finished, the lamp turns
green.
CB-2LFE
3
Remove the battery.
z z After unplugging the battery charger,
remove the battery by pushing it in ( )
and up ( ).
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Smart Auto
Mode
3
Other Shooting
Modes
4
P Mode
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
12