Editing The Registry Key For Vmware View 3 - HP t5630 - Thin Client Manual

Select the USB devices you want to redirect.
2.
To automatically redirect all USB devices, check Auto-share devices (Auto-share is off by

default).
NOTE:
Auto-share will automatically share devices when they are plugged in. Most
USB keyboards and mice are automatically excluded from Auto-share,
because when a device is shared, it is disconnected from the local system.
However, some multi-interface (composite USB) keyboards might not be
automatically excluded from Auto-share. These types of devices should be
manually excluded before enabling Auto-share.
 To redirect specific USB devices, select each device individually from the list displayed, then
click Share, Unshare, or Exclude.
A shared (redirected) device behaves as if it is connected to the remote desktop.
o
An unshared (not redirected) device is available to the local thin client only.
o
An excluded device will not be automatically shared, even when Auto-share is
o
selected.
To prevent a device from being automatically redirected for use with the remote desktop,

select the device and click Exclude. This disables both Share and Unshare. In order to share
the device manually or automatically, you must click Unexclude.

Editing the Registry Key for VMWare View 3

NOTE:
It is highly recommended that you back up (export) the Registry prior to
modifying anything in it.
If you install additional VMWare features after installing the HP Remote Desktop Protocol (RDP)
Multimedia and USB Enhancements software, the registry keys are cleared and the add-on is no
longer functional. You will need to edit the Registry key, as shown in the steps below.
Click Start > Run.
1.
Type REGEDIT and click OK.
2.
Browse to the following key:
3.
HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.\VMware VDM\Client
Right-click VirtualChannelDLLs and select Modify.
4.
Type the following text into the key value text box:
5.
C:\Program Files\Common Files\VMware\VMware Virtual
Printing\TPClnRDP.dll,hpusbrdpclnt.dll,HPMMRCLI.dll
Click OK.
6.
6