Compaq Presario 1600 - Notebook PC Maintenance And Service Manual page 78

| Home Page
Illustrated Parts Catalog
Removing the Fan Assembly
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Modem
Processor
Status Panel
Interface
Board
Hard Drives
Battery
Charger Board
CD Drive
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
Audio Board
System Board
Memory
Module
Maintenance & Service Guide
Presario 1600 Series
Models: 1650 and 1655
| Notice | Preface | Product Description
| Removal & Replacement Procedures
Pin Assignments | Battery Pack Operations
| Troubleshooting
| Specifications
To remove the fan
assembly, complete
the following steps:
1. Prepare the
computer for
disassembly.
2. Remove the
palmrest cover with
touch pad.
3. Remove the
keyboard.
4. Remove the
heatspreader.
5. Remove the
panel assembly.
6. Remove the
CPU cover.
7. Disconnect the fan
cable from the
connector on the
system board. Pull the
fan from the chassis
slot.
To remove the fan
gasket, complete the
following step:
Pull the gasket from
the fan.
IMPORTANT:
To replace the fan
assembly, reverse the
previous procedures.
display
Upper
Replace
the fan
gasket,
place the
fan at a
15 degree
angle,
and push
forward
to replace
the fan
assembly.