Compaq Presario 1600 - Notebook PC Maintenance And Service Manual page 50

Maintenance & Service Guide
| Home Page | Notice
Illustrated Parts Catalog
Pin Assignments
Presario 1600 Series
Models: 1650 and 1655
| Preface | Product Description
| Removal & Replacement Procedures
| Battery Pack Operations
4. Turn the computer over (right side up),
pull forward on the display latches to release
and open the display assembly.
5. Lift up front end of the palmrest cover
with touch pad and remove it from the
groove in the chassis.
6. Tilt the palmrest cover with touch pad,
allowing it to rest on top of the keyboard,
and disconnect the flex cable from the LIF
connector on the palmrest cover.
To replace the palmrest cover with touch
pad, reverse the previous procedures.
Return to Removal & Replacement
Procedures
| Troubleshooting
| Specifications
CAUTION: When replacing the
palmrest cover with touch pad, ensure
that the cable is fully inserted into the
LIF connector on the system board. If
the metal end should come in contact
with the keyboard, damage may occur
to the computer.