Compaq Presario 1600 - Notebook PC Maintenance And Service Manual page 49

| Home Page
Illustrated Parts Catalog
Removing the Palmrest Cover with Touch Pad
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Modem
Processor
Status Panel
Interface
Board
Hard Drives
Battery
Charger Board
CD Drive
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
Audio Board
System Board
Memory
Module
Maintenance & Service Guide
Presario 1600 Series
Models: 1650 and 1655
| Notice | Preface |
| Removal & Replacement Procedures
Pin Assignments |
Product Description
Battery Pack Operations
| Troubleshooting
| Specifications
The palmrest
cover with touch
pad must be
removed to gain
access to any of
the interior
components of the
computer, and it is
the first
component that
has to be removed
to gain access to
the interior
components.
It is not
necessary
to remove
the display
panel
assembly to
NOTE:
access the
interior
components
of the
computer.
To remove the
palmrest cover
with touch pad,
complete the
following steps:
1. Prepare the
computer for
disassembly.
2. Close the
computer and turn
the computer
upside down.
3. Remove three
screws from the
bottom of the
computer.
Next Step