Fluorescent Lamp - Toshiba Satellite A40 Maintenance Manual

4.26 Fluorescent lamp

4
4.26 Fluorescent lamp
This system uses LCD modules from the following suppliers. The procedure for replacing the
fluorescent lamp is different for each LCD module. Refer to the appropriate procedure.
Type Part No.
14.1
VF2093P01
inch
(XGA)
VF2058P01
G33C00015110
15.0
G33C0000M110
inch
(XGA)
G33C0000K110
G33C0000L110
G33C0000Q110
G33C0000Q310
15.0
G33C0000R110
inch
(SXGA+)
G33C0000P110
NOTE: - When working with a LCD module, always use a flat, grounded table.
- Handle the backlight unit in the environment without dust, such as on the clean
bench. Keep the worktable free from any screws or other material that may
scratch the LCD surface.
- Use an anti-static or protective sheet.
- When replacing the FL unit, cover with a finger protector or similar to prevent
soiling or scratching the LCD panel.
- Be careful when handling the lamp. Excessive force may break the lamp.
- Be careful not to soil or deform the lamp reflector.
- Make sure that the power of the LCD module is turned off before connecting
or disconnecting cables and connectors.
Satellite A40 Maintenance Manual (960-458)
Supplier
Chimei
Samsung
TMD
Chimei
LG.Philips
Samsung
Sharp
Sharp
LG.Philips
Sharp
4 Replacement Procedure
Section
4.26.1
4.26.2
4.26.3
4.26.4
4.26.5
4.26.6
4.26.7
4.26.7
4.26.8
4.26.9
4-69