Toshiba R30-C User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. R30-C
  6. User manual

Toshiba R30-C User Manual

Hide thumbs Also See for R30-C:
Table of Contents

Advertisement

Quick Links

User's Manual
R30-C/R30t-C/A30-C/A30t-C
R40-C/A40-C

Advertisement

Table of Contents
loading

Related Manuals for Toshiba R30-C

Summary of Contents for Toshiba R30-C

  • Page 1 User's Manual R30-C/R30t-C/A30-C/A30t-C R40-C/A40-C...

  • Page 2: Table Of Contents

    TOSHIBA VIDEO PLAYER ..............4-21 TOSHIBA Blu-ray Disc Player ............4-23 Battery ....................4-25 Wireless WAN Device (R30-C/A30-C) ..........4-32 Wireless WAN Device (R40-C/A40-C) ..........4-33 GPS Function ..................4-35 Additional memory module (only for R30-C/A30-C) ......4-35 User's Manual...
  • Page 3 LAN ....................... 4-40 Memory media ..................4-42 Smart Card ................... 4-46 External Display .................. 4-47 TOSHIBA Hi-Speed Port Replicator III 180W/120W ......4-51 Security lock ..................4-53 Optional TOSHIBA Accessories ............4-53 Sound System and Video mode ............4-54 Chapter 5 Utilities and Advanced Usage Utilities and Applications ..............

  • Page 4: Chapter 1 Toshiba Legal, Regulatory, And Safety

    © 2015 TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 5: Regulatory Information

    ® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toshiba Corporation and its affiliates is under license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

  • Page 6: Fcc Conditions

    Only peripherals complying with the FCC class B limits can be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external RGB monitor port, Universal Serial Bus (USB...

  • Page 7: Working Environment

    EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected/implemented those options/cables have to provide assurance that the system (PC plus options/cables) still fulfils the required standards.
  • Page 8 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
  • Page 9 Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation.

  • Page 10: Following Information Is Only For Turkey

    Toshiba meets all requirements of Turkish regulation 28300 “Restriction of the use of certain hazardous substances in electrical and electronic equipment”.

  • Page 11: Video Standard Notice

    Video Standard Notice THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (I) ENCODING VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS ("VIDEO") AND/OR (II) DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH...

  • Page 12: Energy Star® Program

    If the model you purchased is compliant, it uses the ENERGY STAR logo and the following information applies. TOSHIBA is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency. Your computer...

  • Page 13: Optical Disc Drive Safety Instructions

    To prevent direct exposure to the laser beam, do not try to open the enclosure. Location of the Required Label (Sample shown below. Location of the label and manufacturing information might vary.) TOSHIBA SAMSUNG STORAGE TECHNOLOGY KOREA CORPORATION 14F, Bldg. No.102, Digital empire2, 486 Sin-dong, Yeongtong-gu, Suwon-si,...

  • Page 14: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the following general precautions and to note the cautions included in the text of the manual.

  • Page 15: Cleaning The Computer

    Stress injury Carefully read the Instruction Manual for Safety and Comfort. It contains information on the prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use. It also includes information on work space design, posture, and lighting that can help reduce physical stress.

  • Page 16: Safety Icons

    Moving the computer While the computer is designed for flexible day-to-day usage, you should exercise a few simple precautions when moving it in order to help ensure trouble-free operation. Make sure all disk/disc activity has ended before moving the computer. Turn off (shut down) the computer.
  • Page 17 Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions. A caution informs you that improper use of equipment or failure to follow instructions might cause data loss, equipment damage, or might result in minor or moderate injury.

  • Page 18: Chapter 2 Getting Started

    This chapter provides an equipment checklist, and basic information to start using your computer. If you use an operating system that was not pre-installed by TOSHIBA, some of the features described in this manual might not function properly. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.

  • Page 19: Short Model Name

    Full Model Name Short Model Name 33.8cm PORTÉGÉ R30-C/R30t-C/A30-C/A30t-C; R30-C/A30-C (13.3") Satellite R30-C/R30t-C/A30-C/A30t-C; Satellite Pro R30-C/R30t-C/A30-C/A30t-C 35.6cm TECRA A40-C; Satellite Pro A40-C; Satellite Pro R40-C/A40-C (14.0") R40-C Using your computer for the first time Be sure to read the enclosed Instruction Manual for Safety and Comfort for information on the safe and proper use of this computer.

  • Page 20: Connecting The Ac Adaptor

    Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor might cause fire or damage to the computer possibly resulting in serious injury.
  • Page 21 When you connect the AC adaptor to the computer, always follow the steps in the exact order as described in this User’s Manual. Connecting the power cable to a live electrical outlet should be the last step otherwise the adaptor DC output plug might hold an electrical charge and cause an electrical shock or minor bodily injury when touched.

  • Page 22: Opening The Display

    Connect the DC output plug of the AC adaptor to the DC IN 19V jack on your computer. Figure 2-3 Connecting the DC output plug to the computer (R30-C/A30-C) Figure 2-4 Connecting the DC output plug to the computer (R40-C/A40-C) 1.

  • Page 23: Turning On The Power

    Open and close the display panel with reasonable care. Opening it vigorously or slamming it shut might damage the computer. Do not put your fingers in the gap between the LCD panel and battery pack when closing your LCD, otherwise your fingers might get hurt. Be careful not to open the display panel too far as this might put stress on the display panel’s hinges and cause damage.

  • Page 24: Turning Off The Power

    Figure 2-6 Turning on the power (R30-C/A30-C) 1. Power button Product appearance depends on the model you purchased. Initial setup The Windows Startup Screen is the first screen displayed when you turn on the power. To install the operating system properly, follow the on-screen instructions on each screen.

  • Page 25: Restarting The Computer

    Click Start and then select Shut down. Turn off any peripheral devices connected to your computer. Do not turn the computer or peripheral devices back on immediately. Wait a short period to avoid any potential damage. Restarting the computer Certain conditions require that you reset the computer, for example if: You change certain computer settings.
  • Page 26 Note that keyboard keys can only be used if the Wake-up on Keyboard option is enabled within the TOSHIBA HWSetup. If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode.

  • Page 27: Hibernation Mode

    Sleep Mode limitations Sleep Mode will not function under the following conditions: Power is turned back on immediately after shutting down. Memory circuits are exposed to static electricity or electrical noise. The battery power is exhausted and the AC Adaptor is not connected. Hibernation Mode The Hibernation Mode feature saves the contents of memory to the internal storage drive when the computer is turned off so that, the next time it is...

  • Page 28: System Recovery

    Click Choose what the power button does or Choose what closing the lid does. Enable the desired Hibernation Mode settings for When I press the power button and When I close the lid. Click the Save changes button. Data save in Hibernation Mode When you turn off the power in Hibernation Mode, the computer takes a moment to save the current data in memory to the internal storage drive.

  • Page 29: Creating Recovery Media

    ® Check your Windows manual for more information on backing up your system (including the system image backup feature). Creating Recovery Media This section describes how to create Recovery Media. Be sure to connect the AC adaptor when you create Recovery Media. Be sure to close all other software programs except the Recovery Media Creator.
  • Page 30 Insert the first blank disc into the optical disc drive tray, or insert the USB Flash Memory into one available USB port. Click Start -> All Programs -> TOSHIBA -> Support & Recovery -> Recovery Media Creator. After Recovery Media Creator starts, select the type of media and the title you wish to copy, and then click the Create button.

  • Page 31: Recovery Partition

    Restoring the pre-installed software from the Recovery Partition A portion of the total internal storage drive space is configured as a hidden recovery partition. This partition stores files which can be used to restore pre-installed software in the event of a problem. If you set up your internal storage drive again later, do not change, delete, or add partitions in a manner other than specified in the manual, otherwise you might find that space for the required software is not available.

  • Page 32: Chapter 3 The Grand Tour

    Front with the display closed (R30-C/A30-C) The following figure shows the front of the computer with the display panel in the closed position. Figure 3-1 Front of the computer with display panel closed (R30-C/A30-C) 1. Stereo speakers 5. Memory media slot 2.
  • Page 33 For some models, the indicator blinks to indicate the connection status of the Wireless WAN function. Some models are equipped with the Wireless WAN function. Left side (R30-C/A30-C) The following figure shows the left side of the computer. User's Manual...
  • Page 34 Figure 3-2 The left side of the computer (R30-C/A30-C) 1. DC IN 19V jack 4. Optical disc drive* 2. LAN jack 5. Smart Card slot* 3. Universal Serial Bus (USB 3.0) port * Provided with some models. Product appearance depends on the model you purchased.
  • Page 35 Some models are equipped with a Smart Card slot. Right side (R30-C/A30-C) The following figure shows the right side of the computer. Figure 3-3 The right side of the computer (R30-C/A30-C) 1. Headphone/Microphone jack 4. External RGB monitor port 2. Universal Serial Bus (USB 3.0) port 5.
  • Page 36 Universal Serial Bus Two Universal Serial Bus ports, which comply to (USB 3.0) ports the USB 3.0 standard, are provided on the right side of the computer. USB 3.0 ports are compliant with USB 3.0 standard and backward compatible with USB 2.0 devices.
  • Page 37 Back (R30-C/A30-C) The following figure shows the back of the computer. Figure 3-4 The back of the computer (R30-C/A30-C) 1. Battery pack Product appearance depends on the model you purchased. Battery pack The rechargeable lithium-ion battery pack provides power to the computer when the AC adaptor is not connected.
  • Page 38 180W/120W. Some models are equipped with the docking port. Only the TOSHIBA Hi-Speed Port Replicator III 180W or 120W is compatible with the docking port. Do not attempt to use any other Port Replicator. Keep foreign objects out of the docking port. A pin or similar object can damage the circuitry of the computer.
  • Page 39 This section shows the computer with the display panel open. In order to open the display, lift up the display panel and position it at a comfortable viewing angle for you. Figure 3-6 The front of the computer with the display panel open (R30-C/A30-C) 1. Wireless communication antennas 9. Keyboard (not shown)* 2.
  • Page 40 Wireless Depending on the configuration of your communication computer, one or all of the following antennas are antennas built-in: Wireless LAN Wireless LAN/Bluetooth Some models are equipped with wireless communication antennas. Do not cover the wireless communication antennas area with any metal objects, otherwise the wireless function might not work.
  • Page 41 AccuPoint are equipped with AccuPoint control buttons. Touch Pad ON/OFF Double tap this icon to enable/disable the Touch icon Pad. TOSHIBA eco icon Double tap this icon to launch the TOSHIBA eco Utility. User's Manual 3-10...

  • Page 42: The Grand Tour For R40-C/A40-C

    Touch Pad The Touch Pad located in the palm rest is used to control the movement of the mouse pointer. To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the mouse pointer to go. Touch Pad control The two buttons below the Touch Pad are used buttons...
  • Page 43 Power indicator The Power indicator normally glows white when the computer is turned on. However, if you turn off the computer into Sleep Mode, this indicator flashes amber. Wireless The Wireless communication indicator glows communication white when the wireless functions are turned on. indicator Some models are equipped with wireless functions.
  • Page 44 Universal Serial Bus One Universal Serial Bus port, which complies to (USB 3.0) port the USB 3.0 standard, is provided on the left side of the computer. The USB 3.0 ports are compliant with USB 3.0 standard and backward compatible with USB 2.0 devices.
  • Page 45 SIM Card slot This slot allows you insert a SIM card which enables a high-speed access to the Internet, corporate Intranet and your email while you are away from office. Refer to the Wireless WAN Device (R40-C/A40- section for more information. Some models are equipped with the SIM Card slot.
  • Page 46 USB 3.0 port(s) might work as USB 2.0 port(s) when operating in USB Legacy Emulation mode. Note that it is not possible to confirm the operation of all functions of all USB devices that are available. Some functions associated with a specific device might not operate properly.
  • Page 47 Do not connect any cable other than a LAN cable to the LAN jack. It might cause damage or malfunction. DC IN 19V jack The AC adaptor connects to this jack in order to power the computer and charge its internal batteries.
  • Page 48 180W/120W. Some models are equipped with the docking port. Only the TOSHIBA Hi-Speed Port Replicator III 180W or 120W is compatible with the docking port. Do not attempt to use any other Port Replicator. Keep foreign objects out of the docking port. A pin or similar object can damage the circuitry of the computer.
  • Page 49 Front with the display open (R40-C/A40-C) This section shows the computer with the display panel open. In order to open the display, lift up the display panel and position it at a comfortable viewing angle for you. User's Manual 3-18...
  • Page 50 10. AccuPoint* 3. Microphone* 11. AccuPoint control buttons* 4. Web Camera* 12. Touch Pad ON/OFF icon* 5. Web Camera LED* 13. TOSHIBA eco icon* 6. Display screen 14. Touch Pad 7. Power button 15. Touch Pad control buttons 8. Display hinges 16.
  • Page 51 Wireless Depending on the configuration of your communication computer, one or all of the following antennas are antennas built-in: Wireless LAN Wireless LAN/Bluetooth Some models are equipped with wireless communication antennas. Do not cover the wireless communication antennas area with any metal objects, otherwise the wireless function might not work.
  • Page 52 Display screen 35.6 cm (14.0") LCD screen, configured with one of the following resolutions depending on the model you purchased: HD, 1366 horizontal x 768 vertical pixels FHD, 1920 horizontal x 1080 vertical pixels Be aware that, when the computer is operating on the AC adaptor, the image displayed on the internal screen is somewhat brighter than when it operates on battery power.

  • Page 53: Internal Hardware Components

    TOSHIBA eco icon Double tap this icon to launch the TOSHIBA eco Utility. Some models are equipped with the TOSHIBA eco icon. Touch Pad The Touch Pad located in the palm rest is used to control the movement of the mouse pointer.
  • Page 54 Internal Storage Drive The capacity of the internal storage drive varies depending on the model. To check which type of internal storage drive is included in your model, open the TOSHIBA PC Diagnostic Tool by clicking Start -> All Programs -> TOSHIBA -> Support & Recovery ->...

  • Page 55: Power Condition Descriptions

    Graphics Processing Graphics Processing Unit (GPU) performance Unit might vary depending on product model, design configuration, applications, power management settings and features utilized. GPU performance is only optimized when operating in AC power mode and might decrease considerably when operating in battery power mode. Legal Footnote (Graphics Processing Unit (GPU)) For more information regarding Graphics Processing Unit (GPU), refer to Legal Footnotes...

  • Page 56: Power Indicator

    Amber Indicates that the AC adaptor is connected and the battery is charging. White Indicates that the AC adaptor is connected and the battery is fully charged. Flashing White Indicates a problem with the computer. Disconnect the AC adaptor and remove the battery for several seconds.

  • Page 57: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter describes the basic operations of your computer, and highlights the precautions that must be taken when using it. Using the Touch Screen (only for R30t-C/A30t-C) Some models are equipped with a touch screen. You can use your finger to manipulate icons, buttons, menu items, the on- screen keyboard, and other items on the touch screen.

  • Page 58: The Keyboard

    Tap once on the Touch Pad to activate an item, such as an app. Pinch or stretch Place two or more fingers down on the Touch Pad and move them toward each other (pinch) or away from each other (stretch). This visually zooms in or out.

  • Page 59: Function Keys

    Figure 4-1 CAPS LOCK indicator (R30-C/A30-C) 1. CAPS LOCK indicator Product appearance depends on the model you purchased. CAPS LOCK This indicator glows green when letter keys are locked into their uppercase format. Function Keys The function keys (F1 ~ F12) are the12 keys at the top of your keyboard.
  • Page 60 Toggles the mode of the keyboard backlight between Timer, On, and Off. To set up the brightness, click Start -> All Programs -> TOSHIBA -> Tools & Utilities -> HWSetup. Click Keyboard tab, and select a level under Keyboard Backlight Brightness Control.

  • Page 61: Using The Accupoint

    For more information, refer to the TOSHIBA Flash Cards Help file. To access this help, click Start -> All Programs -> TOSHIBA -> Tools & Utilities -> Flash Cards. In the Settings for Flash Cards window, click the Help button.

  • Page 62: Using The Fingerprint Sensor

    Position a new cap on the peg and press it into place. The peg is square, so be careful to align the cap’s square hole with the peg. You can buy replacement AccuPoint caps from your TOSHIBA authorized dealer. Using the Fingerprint Sensor Some models have a fingerprint utility installed for the purpose of enrolling and recognizing fingerprints.

  • Page 63: Points To Note About The Fingerprint Sensor

    Fingerprint cannot be used in models that do not have a fingerprint module installed. How to Swipe your Finger Using the following steps when swiping fingers for fingerprint registration or authentication can help to minimize authentication failures: Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swipe finger levelly towards you until the sensor surface becomes visible.
  • Page 64 Do not touch the sensor with a wet finger or any wet objects. Keep the sensor surface dry and free from water vapor. Do not touch the sensor with a soiled or dirty finger as minute foreign particles of dust and dirt might scratch it. Do not paste stickers or write on the sensor.

  • Page 65: Fingerprint Utility Limitations

    TOSHIBA does not guarantee that the fingerprint utility technology will be completely secure or error-free, or that it will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software.
  • Page 66 "Do you want to quit?" is displayed. Click OK. It will be returned to the TOSHIBA Fingerprint Utility main menu. Delete all users fingerprints In the TOSHIBA Fingerprint Utility main menu, click Run as administrator. User Account Control window is displayed. Click Yes.

  • Page 67: Windows Logon Via Fingerprint Authentication

    System Authentication screen is displayed. This will switch the password input screen across to the keyboard-based one. You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the Fingerprint Pre-Boot authentication and its extended function to allow fingerprints to be used to access the computer when it is turned on.
  • Page 68 How to Enable Fingerprint Pre-Boot authentication and Single Sign-On feature It is necessary to first enroll your fingerprint with the TOSHIBA Fingerprint Utility prior to enabling and configuring the Pre-Boot authentication and Single Sign-On feature. You should check that your fingerprint is enrolled before configuring the settings.

  • Page 69: Optical Disc Drive

    Optical disc drive For R30-C/A30-C: Some models are equipped with a DVD Super Multi drive or Blu-ray™ Writer drive. When the computer is accessing an optical disc, the indicator on the drive glows. For R40-C/A40-C: Some models are equipped with a DVD Super Multi drive.
  • Page 70 Grasp the disc tray gently and pull until it is fully opened. Figure 4-4 Pressing the eject button and pulling the disc tray open (R30-C/A30- 1. Eject button 2. Disc tray Product appearance depends on the model you purchased. Lay the disc, label side up, in the disc tray.

  • Page 71: Removing Discs

    Wait for the optical disc drive indicator to go out before you open the disc tray (only for R30-C/A30-C). Also, if the disc is spinning when you open the disc tray, wait for it to stop before you remove it.

  • Page 72: Writable Discs

    Writable discs This section describes the types of writable discs. Check the specifications of your drive to see the types of discs it can write. Use TOSHIBA Disc Creator to write compact discs. CD-R discs can be written only once. The recorded data cannot be erased or changed.

  • Page 73: Important Message

    Based on TOSHIBA limited compatibility testing, we suggest the following manufacturers of disc media, however, it must be noted that disc quality can affect write or rewrite success rates. Also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. CD-R: TAIYO YUDEN CO., Ltd.

  • Page 74: When Writing Or Rewriting

    DVD+R: MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media) DVD+R DL: MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x speed media) DVD-RW: DVD Specifications for Recordable Disc for Version 1.1 or version MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 6x speed media) DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD.

  • Page 75: Toshiba Disc Creator

    Keep mobile phones and other wireless communication devices away from the computer. TOSHIBA Disc Creator Be aware of the following limitations when you use the TOSHIBA Disc Creator: DVD Video cannot be created using TOSHIBA Disc Creator. DVD Audio cannot be created using TOSHIBA Disc Creator.

  • Page 76: Data Verification

    "Disc Backup" function of TOSHIBA Disc Creator. TOSHIBA Disc Creator cannot record in packet format. You might not be able to use the "Disc Backup" function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, or DVD+RW disc that was made with other software on a different optical media recorder.

  • Page 77: Toshiba Video Player

    Refer to the Help files for additional TOSHIBA Disc Creator information. TOSHIBA VIDEO PLAYER TOSHIBA VIDEO PLAYER is only provided with some models. Please be aware of the following limitations when you use the TOSHIBA VIDEO PLAYER: Notes on use This software can only be used on Windows operating system.
  • Page 78 VIDEO PLAYER might not function properly. Do not change the screen resolution while running the TOSHIBA VIDEO PLAYER. Do not change the display device while running the TOSHIBA VIDEO PLAYER. Starting TOSHIBA VIDEO PLAYER Use the following procedure to start TOSHIBA VIDEO PLAYER.

  • Page 79: Toshiba Blu-Ray Disc Player

    TOSHIBA VIDEO PLAYER features and instructions are explained in details in TOSHIBA VIDEO PLAYER Manual. Use the following procedure to open TOSHIBA VIDEO PLAYER Manual. Press the F1 key when TOSHIBA VIDEO PLAYER is launched and click the Help button. TOSHIBA Blu-ray Disc Player Please be aware of the following limitations when you use TOSHIBA Blu- ray Disc Player.
  • Page 80 When you purchase Blu-ray™ Video, make sure it matches your drive, otherwise it will not play properly. To play back video on an external display or TV using TOSHIBA Blu- ray Disc Player, use output devices like external displays or TV that have HDCP supported HDMI port.

  • Page 81: Battery

    TOSHIBA Blu-ray Disc Player features and instructions are explained in details in TOSHIBA Blu-ray Disc Player Manual. Use the following procedure to open TOSHIBA Blu-ray Disc Player Manual. Press the F1 key when TOSHIBA Blu-ray Disc Player is launched and click the Help button. Battery This section explains battery types, use, recharging methods and handling.

  • Page 82: Battery Pack

    If the RTC battery becomes completely discharged, the system will lose this information and the real- time clock and calendar will stop working. You can change the Real-Time Clock settings in the TOSHIBA Setup Utility. Refer to Real-Time Clock for further information.

  • Page 83: Charging The Batteries

    Use only the computer connected to an AC power source or optional TOSHIBA Battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger. Charging Time (R30-C/A30-C) The following table shows the approximate time required to charge an exhausted battery fully.

  • Page 84: Monitoring Battery Capacity

    Charging Time (R40-C/A40-C) The following table shows the approximate time required to charge an exhausted battery fully. Battery type Power off Power on Battery pack about 3.0 hours about 3.0 ~ 10 hours (45 Wh, 4 cell) RTC battery Does not Does not charge charge Be aware that the charging time when the computer is on is affected by...

  • Page 85: Maximizing Battery Operating Time

    Batteries exhausted time (R30-C/A30-C) When you turn off the power of your computer with batteries fully charged, the batteries exhaust within the following approximate period.

  • Page 86: Extending Battery Life

    Battery type Sleep Mode Shut Down Mode Battery pack about 3 days about 65 days (45 Wh, 4 cell) RTC battery about 7 years about 7 years Batteries exhausted time (R40-C/A40-C) When you turn off the power of your computer with batteries fully charged, the batteries exhaust within the following approximate period.

  • Page 87: Removing The Battery Pack

    Slide the battery lock into its unlocked ( ) position. Slide and hold the battery release latch to disengage the battery pack and then lift it up to remove it from the computer. Figure 4-7 Releasing the battery pack (R30-C/A30-C) 1. Battery lock 3. Battery pack 2.

  • Page 88: Wireless Wan Device (R30-C/A30-C)

    10mm, diameter 0.8mm), such as a straightened paper clip, into the eject hole. Gently pull to open the SIM card tray. Never pull the SIM card tray completely out of the slot. Figure 4-8 Open the SIM card tray with the eject hole (R30-C/A30-C) 1. Eject hole 3. SIM card 2.

  • Page 89: Wireless Wan Device (R40-C/A40-C)

    Do not touch the connectors on the SIM card or on the computer. Debris on the connectors might cause access problems. Removing a SIM Card (R30-C/A30-C) To remove the SIM card, do the following: Shut down the computer. Make sure the Power indicator is off.
  • Page 90 To pop the SIM card tray partially open, insert a slender object (about 10mm, diameter 0.8mm), such as a straightened paper clip, into the eject hole. Gently pull to open the SIM card tray. Never pull the SIM card tray completely out of the slot. Figure 4-9 Open the SIM card tray with the eject hole (R40-C/A40-C) 1.

  • Page 91: Gps Function

    Buildings, streets or residential areas Near to high voltage cables Bad weather, such as heavy rain or snow Additional memory module (only for R30-C/A30- This section is only applicable for models equipped with the memory module cover. You can install additional memory into the computer in order to increase the amount of system memory that is available.

  • Page 92: Installing A Memory Module

    When installing or removing a memory module, you must ensure that you do not touch any other internal areas of the computer. Use only memory modules approved by TOSHIBA. Do not try to install or remove a memory module under the following conditions.
  • Page 93 Slide your fingernail or a thin object under the cover and lift it off. Figure 4-11 Removing the memory module cover 1. Screws 2. Memory module cover Product appearance depends on the model you purchased. User's Manual 4-37...
  • Page 94 Align the notch of the memory module with that of the memory slot and gently insert the module into the slot at about a 30 degree angle before holding it down until the latches on either side snap into place. Figure 4-12 Seating the memory module 1.

  • Page 95: Removing A Memory Module

    Seat the memory module cover in place and secure it with the screw. Ensure that the memory module cover is firmly closed. Figure 4-13 Seating the memory module cover 1. Memory module cover 2. Screws Product appearance depends on the model you purchased. Install the battery pack.

  • Page 96: Lan

    Grasp the module by its edges and remove it from the computer. If you use the computer for a long time, the memory modules and the circuits locating close to the memory modules will become hot. In this case, let them cool to room temperature before you replace them. Or you will get burnt if you touch any of them.

  • Page 97: Lan Cable Types

    The Link speed (10/100/1000 megabits per second) changes automatically depending on the network conditions (connected device, cable or noise and so on). LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings might cause a malfunction in LAN operation.

  • Page 98: Memory Media

    Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. Figure 4-15 Connecting the LAN cable (R30-C/A30-C) Figure 4-16 Connecting the LAN cable (R40-C/A40-C) 1. LAN jack 2. LAN cable Product appearance depends on the model you purchased.
  • Page 99 Figure 4-17 Examples of memory media Secure Digital (SD) Card microSD card adaptor and microSD card MultiMediaCard (MMC) Points to note about the memory media card SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music.

  • Page 100: Media Care

    To format all areas of the memory card, including the protected area, you must obtain an appropriate application that applies the copy protection system. Media care Observe the following precautions when handling the card. Do not twist or bend cards. Do not expose cards to liquids or store in humid areas or lay media close to containers of liquid.

  • Page 101: Removing Memory Media

    Press the memory media gently until it clicks into place. Figure 4-18 Inserting memory media (R30-C/A30-C) Figure 4-19 Inserting memory media (R40-C/A40-C) 1. Memory media slot 2. Memory media Product appearance depends on the model you purchased. Make sure that the memory media is oriented properly before you insert it.

  • Page 102: Smart Card

    If you remove the memory media or turn off the power while the computer is accessing the memory media, you might lose data or damage the media. Do not remove the memory media while the computer is in Sleep or Hibernation Mode.

  • Page 103: External Display

    Press the Smart Card gently to ensure a firm connection is made. The computer will identify the Smart Card and display an icon in the Windows Taskbar. When inserting a Smart Card into the Smart Card slot, make sure to confirm that the card is oriented correctly before inserting.
  • Page 104 External RGB monitor port. However, external monitor cables which have connectors with fastening screws can still be used. Turn the external monitor's power on. Figure 4-20 Connecting the RGB cable to the External RGB monitor port (R30-C/ A30-C) 1. External RGB monitor port 2.
  • Page 105 Plug the other end of the HDMI cable into the HDMI out port on your computer. Turn the HDMI display device's power on. Figure 4-21 Connecting the HDMI out port (R30-C/A30-C) 1. HDMI out port 2. HDMI cable Product appearance depends on the model you purchased.

  • Page 106: Wireless Display

    Wireless display Some models support Intel Wireless Display (Intel WiDi), a wireless technology which utilizes Wi-Fi to allow the computer to be wirelessly connected to external displays including TVs as extended screens. With wireless display, documents, streamed/local media contents or other online contents can be shared wirelessly with others.

  • Page 107: Toshiba Hi-Speed Port Replicator Iii 180W/120W

    Refer to the Port Replicator’s User's Manual for more details. To dock your computer in the Port Replicator, do the following: For R30-C/A30-C: Align the top left or top right corner of your computer to the A+ mark on the Port Replicator.
  • Page 108 1. Docking port (computer) Product appearance depends on the model you purchased. Make sure the AC adaptor is always connected to the TOSHIBA Hi-Speed Port Replicator III 180W/120W while in use. Otherwise the Port Replicator will stop working, possibly resulting in data loss.

  • Page 109: Security Lock

    To connect a security cable to the computer, do the following: Turn the computer so the security lock slot faces you. Align the security cable with the lock slot and secure it in place. Figure 4-24 Security lock (R30-C/A30-C) Figure 4-25 Security lock (R40-C/A40-C) 1. Security lock slot 2.

  • Page 110: Sound System And Video Mode

    Battery section for further information. TOSHIBA Hi-Speed TOSHIBA Hi-Speed Port Replicator III 180W/ Port Replicator III 120W provides several kinds of ports. Refer to 180W/120W the Port Replicator’s User's Manual for more details.

  • Page 111: Realtek Hd Audio Manager

    On the Enhancements tab, select the sound effects you would like, and click Apply. DTS Studio Sound DTS Studio Sound™ is a premium audio enhancement suite that utilizes revolutionary audio technology to provide the most immersive and realistic listening experience ever offered for a two speaker playback environment. DTS Studio Sound is provided with some models.

  • Page 112: Power Management

    Power Management The audio controller in your computer can be turned off when the audio function is not used. To adjust the configuration of audio power management, click the Power Management button When audio power management is enabled, the circle button at the upper left of the Power Management is blue and convex.

  • Page 113: Chapter 5 Utilities And Advanced Usage

    To access this utility, click Start -> All Programs -> TOSHIBA -> Media & Entertainment -> TOSHIBA VIDEO PLAYER. This utility is only provided with some models. For details on how to use TOSHIBA VIDEO PLAYER, see the help file. User's Manual...
  • Page 114 Programs -> TOSHIBA -> Media & Entertainment -> TOSHIBA Blu-ray Disc Player. This utility is only provided with some models. For details on how to use TOSHIBA Blu-ray Disc Player, see the help file. Bluetooth Stack for This software enables communication between...
  • Page 115 To access the utility, click Start -> All Programs -> TOSHIBA -> Support & Recovery -> HDD SSD Alert. TOSHIBA Sleep Utility This utility can either enable or disable the following functions: Sleep and Charge: By connecting to the USB port, devices such as digital audio...

  • Page 116: Special Features

    You might not have all the software listed above depending on the model you purchased. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures.
  • Page 117 Low battery When battery power is exhausted to the point automatic Hibernation that computer operation cannot be continued, the system automatically enters Hibernation Mode Mode and shuts itself down. This can be specified in the Power Options. Sleep Mode If you have to interrupt your work, you can use this feature to allow you to turn off power to the computer without exiting from your software.

  • Page 118: Using The Toshiba Sleep Utility

    Using the TOSHIBA Sleep Utility The TOSHIBA Sleep Utility is used for changing settings of the following function(s): Sleep and Charge It also displays the remaining battery capacity. Sleep and Charge Your computer can supply USB bus power (DC5V) to the USB port even when the power of the computer is turned OFF.

  • Page 119: Starting The Toshiba Sleep Utility

    USB ports. Do not allow USB ports to come into contact with metal products, for example when carrying the computer in your bag. Starting the TOSHIBA Sleep Utility To start the utility, click Start -> All Programs -> TOSHIBA -> Tools & Utilities -> Sleep Utility. Enabling Sleep and Charge This utility can be used to enable and disable the Sleep and Charge function.

  • Page 120: Toshiba Password Utility

    Windows password. User Password To start the utility, click the following items: Start -> All Programs -> TOSHIBA -> Tools & Utilities -> Password Utility -> User Password User authentication might be required to validate user rights when using TOSHIBA Password Utility to delete or change passwords, etc.

  • Page 121: Supervisor Password

    Refer to TOSHIBA Setup Utility section for further information. If you forget your HDD/SSD User Password, TOSHIBA will NOT be able to assist you, and your internal storage drive will be rendered COMPLETELY and PERMANENTLY INOPERABLE. TOSHIBA will NOT be held responsible for any loss of any data, any loss of use or...

  • Page 122: Toshiba Hwsetup

    TOSHIBA HWSetup is the TOSHIBA configuration management tool available through the Windows operating system. To run TOSHIBA HWSetup, click Start -> All Programs -> TOSHIBA -> Tools & Utilities -> HWSetup. The TOSHIBA HWSetup window contains a number of tabs to allow specific functions of the computer to be configured.

  • Page 123: Toshiba Pc Health Monitor

    20 MB or less per year. This information is used to identify and provide a notification of system conditions which might affect the performance of your TOSHIBA computer. It might also be used to help diagnose problems should the computer require service by TOSHIBA or TOSHIBA authorized service providers.

  • Page 124: Using The Hard Disk Drive (Hdd) Protection

    TOSHIBA standard limited warranty terms and limitations apply. Starting the TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor can be opened by clicking Start -> All Programs -> TOSHIBA -> Support & Recovery -> PC Health Monitor. The TOSHIBA PC Health Monitor main screen is displayed.

  • Page 125: Hdd Protection

    Setting up HDD Protection You can change HDD Protection settings. To open the utility, click Start -> All Programs -> TOSHIBA -> Tools & Utilities -> HDD Protection. The utility can also be started from the icon in the Taskbar or from the Control Panel.

  • Page 126: Toshiba Setup Utility

    Intensely shaking the computer or other subjecting it to strong impacts might damage the computer. TOSHIBA Setup Utility TOSHIBA Setup Utility is a BIOS setup utility that provides you a menu- based user interface so that you can easily view and change BIOS settings.
  • Page 127 Hold down the F2 key and then release this key one second after the computer is power on. To save the changes and exit the utility, press the F10 key and proceed by selecting Yes or select Exit -> Exit Saving Changes -> Yes. The computer restarts immediately.

  • Page 128: Troubleshooting

    In reality many problems can be solved simply, but a few might require help from TOSHIBA Support. If you find you need to consult others, be prepared to describe the problem in as much detail as possible.

  • Page 129: Analyzing The Problem

    Always try to make detailed notes of your observations and keep them in a permanent error log - this helps you to describe your problems to TOSHIBA Support. In addition, if a problem recurs, the log you have made helps to identify the problem faster.

  • Page 130: If Something Goes Wrong

    Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure that the device or software can be used with your computer. Use of incompatible devices might cause injury or might damage your computer.

  • Page 131: Hardware And System Checklist

    By holding down one of the following keys during startup, your computer can load the following advanced options. Advanced option TOSHIBA Setup Utility Boot Menu 0 (zero) Recovery options If your computer starts to load the Operating System instead of desired advanced options, do the following: Click Start.

  • Page 132: Overheating Power Down

    If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact TOSHIBA Support. AC power If you have trouble turning on the computer with the AC adaptor connected, check the status of the DC IN/Battery indicator.
  • Page 133 However, if you do not believe the battery is at the end of its operating life, you should speak to TOSHIBA Support. Battery does not If you frequently recharge a partially charged...
  • Page 134 The RTC battery should be replaced only by your dealer or by a TOSHIBA service presentative, and then set the date/time in the TOSHIBA Setup Utility by using the following steps: Launch the TOSHIBA Setup Utility.

  • Page 135: Internal Display Panel

    (remapping involves changing or reassigning the function of each key). If you are still unable to use the keyboard, you should contact TOSHIBA Support. Internal display panel Apparent problems of the computer's display panel might be related to setup and configuration of the computer.

  • Page 136: Memory Media Card

    As a last resort, you should reformat the HDD and then reload the operating system and all other files and data. If you are still unable to resolve the problem, contact TOSHIBA Support. Optical Disc Drive For further information, refer to Operating Basics.

  • Page 137: Pointing Device

    If you are still unable to resolve the problem, contact TOSHIBA Support. Pointing device If you are using a USB mouse, you should also refer to both the mouse section and the documentation supplied with your mouse.

  • Page 138: Usb Mouse

    To access it, click Start -> Control Panel -> too sensitive or not Hardware and Sound -> Mouse. sensitive enough. If you are still unable to resolve the problem, contact TOSHIBA Support. USB mouse Problem Procedure Mouse pointer does In this instance, the system might be busy.Try...

  • Page 139: Usb Device

    Sleep and Charge function might be disabled. Sleep and Charge Enable the Sleep and Charge function in the function. TOSHIBA HWSetup. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply might be stopped for safety reasons.

  • Page 140: Sound System

    Problem Procedure The battery depletes If Sleep and Charge function is enabled, the quickly even when I computer's battery discharges during hibernation turned OFF the or when the computer is turned off. power of the Connect the AC adaptor to the computer or disable computer.

  • Page 141: External Monitor

    Volume cannot be adjusted during Windows start up or shut down. If you are still unable to resolve the problem, contact TOSHIBA Support. External monitor Also refer to Operating Basics, and to the documentation supplied with your monitor for further information.

  • Page 142: Wireless Lan

    Display error occurs Check that the cable connecting the external monitor to the computer is firmly attached. If you are still unable to resolve the problem, contact TOSHIBA Support. Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub.

  • Page 143: Toshiba Support

    TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you might need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience might be related to software or the operating system so it is important that you investigate other sources of assistance first.

  • Page 144: Appendix Specifications

    Chapter 7 Appendix Specifications This section summarizes the technical specifications of the computer. Physical Dimensions (R30-C/A30-C) The following physical dimensions do not include parts that extend beyond the main body. The physical dimensions vary depending on the model you purchased.

  • Page 145: Power Requirements

    Conditions Altitude (from sea level) Operating -60 to 3,000 meters Non-operating -60 to 10,000 meters maximum Power Requirements AC adaptor 100-240V AC 50 Hz or 60 Hz (cycles per second) Computer 19V DC External RGB monitor port pin assignment Signal Name Description Red Video Signal Green Video Signal...

  • Page 146: Ac Power Cord And Connectors

    Signal Name Description Serial Clock Signal I/O (I): Input to computer I/O (O): Output from computer AC Power Cord and Connectors The AC input plug of the power cord must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used.

  • Page 147: Information For Wireless Devices

    6-15P (250 V) or 5-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia, Europe, and China. United Kingdom UL approved BS approved...

  • Page 148: Wireless Devices And Your Health

    Because wireless products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes wireless products are safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

  • Page 149: Card Specifications

    If this occurs, the outsider might illegally access your system, eavesdrop, or cause the loss or destruction of stored data. TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Card Specifications Compatibility IEEE 802.11 Standard for Wireless LANs...

  • Page 150: Bluetooth Wireless Technology

    Country/region where the product was purchased Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4 GHz and 5 GHz band, local radio regulations might impose a number of limitations to the use of wireless communication equipment.

  • Page 151: Worldwide Operation

    This Bluetooth Stack is based on the Bluetooth specification, depending on the model you purchased. However, TOSHIBA cannot confirm the compatibility between any computing products and/or other electronic devices that use Bluetooth, other than TOSHIBA notebook computers.
  • Page 152 Europe Restrictions for Use of 2400.0-2483.5MHz Frequencies in Europe France: Outdoor use Military Radiolocation limited to 10mW use.Refarming of the 2.4GHz band e.i.r.p. within the has been ongoing in recent years to band allow current relaxed regulation Full 2454-2483.5MHz implementation planned 2012. Italy: For private use, a general authorization is required if WAS/...
  • Page 153 Russian Limited e.i.r.p 100mW. Permitted to use Federation: only for indoor applications, closed industrial and warehouse areas, and on board aircraft. Permitted to use for local networks of aircraft crew service communications on board aircraft in area of the airport and at all stages of flight.
  • Page 154 check the current channel of operation. If operation is occurring outside of the allowable frequencies for outdoor use, as listed above, the user must contact the applicable national spectrum regulator to request a license for outdoor operation. Canada - Industry Canada (IC) This device complies with RSS-210 of the Industry Canada Rules.
  • Page 155 The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca Caution: Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 to...
  • Page 156 If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations.

  • Page 157: Device Authorization

    This equipment is approved to the radio standard by the countries/regions in the following table. If you use this equipment in the countries/regions which are not listed in the following table, contact TOSHIBA Support. As of September 2015 Austria Belgium...

  • Page 158: Information About Intel Amt

    Ireland Italy Japan Korea Latvia Liechtenstein Lithuania Luxemburg Malta Monaco Netherlands Norway Philippines Poland Portugal Romania Slovak Republic Slovenia Spain Sweden Switzerland Information about Intel AMT ® Your computer might support Intel Active Management Technology (AMT) depending on the model you purchased. Using built-in platform capabilities and popular third-party management and security applications, Intel AMT allows IT to better discover, heal, and protect their networked computing assets.
  • Page 159 Enter a new password. Password must comply with the following requirements concerning character types and length: Must be between 8 and 32 characters long. Must contain at least one number (“0”, “1-9”). Must contain a mix of lower-case (“a”, “b”, “z”, etc.) and upper-case (“A”, “B”, “Z”, etc.) letter.

  • Page 160: Legal Footnotes

    When using the computer with the AC adaptor connected and the AMT function set to enabled, power might still be supplied to the system memory even when the computer power is turned off, or the computer is in Sleep Mode or Hibernation Mode. When connecting the AC adaptor, the computer is powered and can be turned on.
  • Page 161 For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact TOSHIBA technical service and support, refer to TOSHIBA support section for more information.

  • Page 162: Battery Life

    Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery might not charge while computer is consuming full power.

  • Page 163: Vcci Class B Information (Japan Only)

    be less if the product includes one or more pre-installed operating systems, such as Microsoft Operating System and/or pre-installed software applications, or media content. Actual formatted capacity might vary. Over a period of time, and depending on the usage of the computer, the brightness of the LCD screen will deteriorate.

  • Page 164: Openssl Toolkit License Issues

    OpenSSL Toolkit License Issues LICENSE ISSUES ============== The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses.
  • Page 165 LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

  • Page 166: Freetype License Issues

    All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)" The word cryptographic can be left out if the rouines from the library being used are not cryptographic related :-). If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:...
  • Page 167 This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least. This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion and use of free software in commercial and freeware products alike.
  • Page 168 stated in the file in its original, unmodified form as distributed in the original archive. If you are unsure whether or not a particular file is covered by this license, you must contact us to verify this. The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg.
  • Page 169 materials: `FreeType Project`, `FreeType Engine`, `FreeType library`, or `FreeType Distribution`. As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted material, only this license, or another one contracted with the authors, grants you the right to use, distribute, and modify it.

  • Page 170: Index

    Graphics Processing Unit 3-24 Battery pack replacing 4-30 HW Setup Bluetooth accessing Bluetooth Stack for Windows by Toshiba 5-2 window Cleaning the computer 1-12 Keyboard function keys 4-3 Cooling vents 3-5, 3-7, 3-15, Function keys F1...F12 4-3 3-17 problems 6-7...
  • Page 171 6-5 inserting 4-44 Power 6-4 removing 4-45 Real Time Clock 6-7 Sound system 6-13 TOSHIBA support 6-16 Memory media slot 4-42 Touch Pad 6-10 USB device 6-12 Moving the computer 1-13 USB mouse 6-11 MultiMediaCard removing 4-45...
  • Page 172 4-46 removing 4-47 Sound system problems 6-13 automatic power off 5-4 TOSHIBA Disc Creator 4-19 TOSHIBA HDD/SSD Alert Utility 5-3 TOSHIBA PC Diagnostic Tool 5-1 Touch Screen 4-1 USB device problems 6-12 Video mode 4-56 Video RAM 3-23 Web Camera 3-9, 3-20...

This manual is also suitable for:

R30t-cA40-cA30-cA30t-cR40-c

Table of Contents