Windows Xp - Epson Stylus Pro WT7900 Network Manual

The necessary components are now installed. Go to the section "Connecting
the Network Interface to the Network" on page 15.

Windows XP

For Windows XP, use the following procedure to install the necessary
components.
Note:
The Windows XP CD may be required during the installation.
1. Click Start, select Control Panel, and then select Network Connections.
2. Under LAN or High-Speed Internet, right-click the Local Area
Connection icon and choose Properties.
3. Check if the following network components are in the list. If they are
already installed, go to "Connecting the Network Interface to the Network"
on page 15.
The following table lists the network components required for configuring
the network interface with EpsonNet Config.
EpsonNet Config's setting screens
TCP/IP, SNMP (IP trap)
14
Setting Up Your System for Network Printing
Necessary components
Internet Protocol (TCP/IP)