Creating And Configuring The Cluster - HP Rx2620-2 - Integrity - 0 MB RAM Installation And Configuration Manual

Table 2-1 Installation and Configuration Input (continued)
Input Description
WWID, slot number, and bus
of each FCA
Cluster name
Cluster IP address and
subnet mask
Default gateway IP address
WINS server IP address
DNS IP address
Local system administrator
password (used during OS
installation)
Domain name
Domain administrator user
name and password (used
during OS installation for
machine to join domain)
Domain account user name
and password for cluster
service (this account has
special privileges on each
cluster node)

Creating and Configuring the Cluster

The following sections describe the steps you follow to create and configure a cluster.
24 Administering the cluster
Value
Node 1:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
Node 3:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
Node 5:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
Node 7:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
IP address:
Subnet mask:
NOTE: For security reasons, do not record the password here.
NOTE:
For security reasons, do not record the password here.
NOTE: For security reasons, do not record the password here.
Node 2:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
Node 4:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
Node 6:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus:
Node 8:
FCA 1 WWID:
FCA 1 slot and bus:
FCA 2 WWID:
FCA 2 slot and bus: