Team State; Team Icons; Team State Icons - HP Rx2620-2 - Integrity - 0 MB RAM Manual
Integrity servers with microsoft windows server 2003 and windows server 2008 hp integrity network adapter teaming
Hide thumbs
Also See for Rx2620-2 - Integrity - 0 MB RAM:
- Service manual (177 pages) ,
- Manual (122 pages) ,
- User manual (110 pages)
Table of Contents
Advertisement
•
Failed (LACP Standby) – The team member has failed because the team has more members
than the switch supports in the LACP protocol. The port is blocked by the switch.
•
Failed (Rx Heartbeat) – The team member is not receiving frames.
•
Failed (Tx Heartbeat) – A failure occurred while attempting to send a frame on the team
member.
•
Failed (Multiple) – The team member has multiple failed conditions.
Team State
The NCU reports a Team State on the Information tab of each configured team. This status allows
the user to determine the overall condition of the team and take corrective action if necessary.
Listed below are the possible team state conditions with definitions:
•
OK – The team is functioning properly. (green team icon)
•
Degraded – The team is functioning, but one or more member(s) is not available to fulfill
its role. (yellow team icon)
•
Redundancy Reduced – The team has one or more failed members but at least two members
are still functional. Redundancy has been reduced since not all members are functional but
redundancy is still available since more than one member is functional. (yellow team icon).
•
Redundancy Lost – The team has one or more failed members and only a single member is
functional. Redundancy has been lost since only one member is functional. (yellow team
icon).
•
Failed – The team has failed and connectivity has been lost. (red team icon).
Team Icons
Team icons are shown on the main page to allow the user to easily recognize status and conditions
of teams. Refer to
Adapter Teaming for additional information.
Figure 4-26 Team state icons
Icons
84
The Mechanics of Teaming for the Advanced User
Figure 4-26
for team state icons. Refer to the HELP file for HP Integrity Network
Description
Good Team. The team is functioning properly.
Team Not Formed. The team has been created, or the
membership has changed, however the application must be
closed and re-invoked for the changes to take effect.
Degraded Team. The team is functioning, but one or more
members is not available to fulfill its role.
Failed team. The team has failed and connectivity has been lost.
Disabled Team. The team is not functioning.
VLAN. One or more VLANs have been defined for the adapter or
team adapters.
Advertisement
Table of Contents
