Using Online Mode and
Online Command Mode
Online mode is used for data transfer; online command mode is
used for entering commands.
Switching to Online Command Mode
To escape from online mode and enter online command mode,
press and hold
When you have correctly entered this escape command:
■
An OK result code is displayed.
■
The established connection is maintained, but input is
interpreted locally and not transmitted to the remote
connection.
Switching to Online Mode
To escape from online command mode and enter online mode,
use either of the following methods:
■
Enter the
■
Terminate the connection with the
Modem Command Guidelines
as you type
shift
(letter "O") command.
ATO
Modem Command Guidelines
+++.
(digit "0") command.
ATH0
5