Bottom Cover; Prepare The Computer For Disassembly (Preparation For Disassembly; Place The Computer In Battery Safe Mode (Battery Safe Mode - HP ZHAN 66 Pro A 14 G3 Maintenance And Service Manual

Bottom cover

Table 5-1 Bottom cover description and part number
Description
Bottom cover
Before removing the bottom cover, follow these steps:
1. Prepare the computer for disassembly
2. Place the computer in Battery Safe mode
Remove the bottom cover:
1. Loosen the five captive Phillips screws (1).
2. Remove the two Phillips M2.0 × 5.0 screws (2) that secure the bottom cover to the computer.
3. Starting under the display, use a nonconductive, nonmarking tool to pry the cover up (3), and then
remove the cover from the computer (4).
Reverse these procedures to install the bottom cover.
(Preparation for disassembly on page
(Battery Safe mode on page
Spare part number
L44558-001
26).
26).
Component replacement procedures 27