Editing A Command; Executing A Command; Repeating A Command; Omitting A Parameter In A Command Line - HP Pavilion zd7000 - Notebook PC Manuallines

Editing a Command

If you make an error while typing a command, backspace over the
error, then retype. You cannot backspace over the AT prefix
because it is interpreted immediately after it is typed.

Executing a Command

To execute a command line, press
the modem to process the command line.)

Repeating a Command

To repeat the last command line issued, enter the
When repeating the
prefix or press
AT
the
AT
The last command entered remains in the command buffer until
the modem is reset or power to the modem is turned off. Both
actions clear the buffer. The
buffer is clear.

Omitting a Parameter in a Command Line

If you enter a command that normally includes a numeric
parameter, such as
the value of the numeric parameter is assumed to be the default
parameter.
For example, the
parameter of zero (
neither parameter is entered,
plus
ATH0
This rule does not apply to the
Modem Command Guidelines
A/
enter,
prefix and
enter
ATHn,
(hang-up) command can have a numeric
Hn
H0
enter.
enter.
command, it is not necessary to enter the
because issuing the
function.
command is invalid while the
A/
without entering the numeric parameter,
), which is the default, or of one (
plus
ATH
(dial) command.
D
Modem Command Guidelines
(Pressing
enter
command.
A/
command repeats
A/
is the equivalent of
enter
instructs
). If
H1
3