Editing And Executing A Command; Omitting A Parameter In A Command Line - HP Compaq NC2400 Command Manual

Windows XP Home and Windows XP Professional:
1. Select Start.
2. Right-click My Computer > Properties > Hardware tab >
Device Manager button.
3. Double-click Modems.
4. Double-click the drop-down icon and verify the manufacturer
listed on the General tab.
For details on modem commands, refer on this CD to
Lucent/Agere Command Set or Conexant's manual, Commands
for Host-Processed or Host-Controlled Modems. For updates to
these modem commands, visit
http://www.Conexant.com.

Editing and Executing a Command

If you make an error while typing a command, simply backspace
over the mistake, then retype. You cannot backspace over the
prefix because it is interpreted immediately after it is typed.
AT
To execute a command line, press
the modem to process the command line.)

Omitting a Parameter in a Command Line

If you enter a command that normally includes a numeric
parameter, such as
missing parameter is assumed to be the default parameter.
For example, the
parameter of zero (
However, if the parameter is missing,
equivalent of
the (dial) command.
D
Modem Command Guidelines (Advanced Users Only)
without the numeric parameter, the
ATHn,
(hang-up) command can have a numeric
Hn
), which is the default, or of one (
H0
plus the
ATH0 enter
Modem Command Guidelines
http://www.Agere.com
. (Pressing
enter
plus the
ATH
key. This rule does not apply to
or
instructs
enter
).
H1
key is the
enter
3