Directing The Display Output When You Turn On The Computer - Toshiba S300 EZ1514 - Satellite Pro - Core 2 Duo 2.1 GHz User Manual

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
NOTE
The quickest way to change the display output settings is to use the
display hot key (
1 Press
2 While holding down
you want takes effect. Briefly pause each time you press the
key to allow time for the display to change.
This hot key cycles through the settings in the following order
(the last two options are available if an external monitor is
connected):
(Sample Image) Display options window
3 Release the
Using external display devices
Some modes are only available with the appropriate device attached
and turned on.
+ ):
Fn F5
and simultaneously.
Fn F5
LCD—Internal display only
LCD + CRT—Internal display and external monitor
simultaneously
CRT—External monitor only
LCD + CRT Multi Monitor—Internal display and external
monitor, with one acting as the primary display and the
other as an extended desktop
Swap—Switch primary display between internal display
and external monitor when using extended desktop
key.
Fn
Getting Started
Fn , press F5 repeatedly until the setting
73
F5