Table of Contents
Advertisement
102
Learning the Basics
Using the optical drive
6
Place the disc carefully in the disc tray, label side up.
(Sample Illustration) Positioning the disc in the drive
7
Gently press the disc onto the center spindle until it clicks into
place.
8
Make sure the disc is completely on the spindle and is lying flat
on the tray.
9
Push the disc tray in by pressing gently on the center of the tray
until it clicks into place.
You are ready to use the disc.
Handle DVDs and CDs carefully, making contact only with the center
hole and edge. Do not touch the surface of the disc. Do not stack
discs. If you incorrectly handle the discs, you could lose data.
If you insert the disc incorrectly, it may jam the drive. If this happens,
contact Toshiba support for assistance.
Advertisement
Table of Contents
