Replacing The Power Supply - Lenovo K100 Hardware Replacement Manual

3. To reinstall the bezel, align the plastic tabs on the bottom of the bezel with the corresponding holes in the
chassis, then snap it into position at the bottom and top of the chassis.
4. Refer to the "Completing the installation".

Replacing the power supply

Attention
Do not remove the computer cover or attempt any repair before reading the "Important safety
information" in the Safety and Warranty Guide that was included with your computer or in the Hardware
Maintenance Manual (HMM) for the computer. To obtain copies of the Safety and Warranty Guide or
HMM, go to the Support Web site at http://www.lenovo.com/support.
To replace the power supply:
1. Remove the computer cover. Refer to "Removing the computer cover".
Note: For this procedure, it helps to lay the computer on its side.
12
Hardware Replacement Guide
31031416 Greenland HRG_EN.indd 12 2007.8.20 4:05:47 PM