Connecting A Usb Device; Removing A Usb Device; Connecting A Powered Usb Device - HP Pavilion g7-2100 User Manual

Connecting a USB device

CAUTION:
device.
▲ Connect the USB cable for the device to the USB port.
NOTE:
section.
A sound indicates that the device has been detected.
NOTE: The first time you connect a USB device, a message in the notification area lets you know
that the device is recognized by the computer.

Removing a USB device

CAUTION:
the USB device.
CAUTION:
procedure to safely remove the USB device.
1. To remove a USB device, save your information and close all programs associated with the device.
2. Click the remove hardware icon in the notification area, at the far right of the taskbar, and then
follow the on-screen instructions.
3. Remove the device.

Connecting a powered USB device

CAUTION:
sure that the device is turned off and its AC power cord is unplugged.
1. Connect the device to the computer.
2. Plug the device power cord into a grounded AC outlet.
3. Turn on the device.
50 Chapter 7 Managing and sharing information
To reduce the risk of damage to a USB connector, use minimal force to connect the
The USB port on your computer may look slightly different from the illustration in this
To reduce the risk of damage to a USB connector, do not pull on the cable to remove
To reduce the risk of loss of information or an unresponsive system, use the following
To reduce the risk of damage to the equipment when connecting a powered device, be