To enhance your viewing enjoyment, use one of the video ports on the computer to connect an external
monitor, projector, or TV.
IMPORTANT:
correct cable. Follow the device manufacturer's instructions.
For information about using your USB Type-C features, go to http://www.hp.com/support, and follow the
instructions to find your product.
Connecting a DisplayPort device using a USB Type-C cable (select products only)
To see video or high-resolution display output on an external DisplayPort device, connect the DisplayPort
device according to the instructions.
NOTE:
To connect a USB Type-C DisplayPort (DP) device to your computer, you need a USB Type-C cable,
purchased separately.
1.
Connect one end of the USB Type-C cable to the USB SuperSpeed port and DisplayPort connector on the
computer.
2.
Connect the other end of the cable to the external DisplayPort device.
3.
Press the Windows key +
PC screen only: View the screen image on the computer only.
●
Duplicate: View the screen image simultaneously on both the computer and the external device.
●
Extend: View the screen image extended across both the computer and the external device.
●
Second screen only: View the screen image on the external device only.
●
Each time you press the Windows key + p, the display state
NOTE:
external device, as follows. Select the Start button, select Settings, and then select System. Under
Display, select the appropriate resolution, and then select Keep changes.
24
Chapter 4 Enjoying entertainment features
Be sure that the external device is connected to the correct port on the computer, using the
p
to cycle through one of four display states:
For best results, especially if you choose the Extend option, increase the screen resolution of the