Multi Rc; Watch Video On A Usb Storage Device - Philips 32HFL4663D/F7 Quick Start Setup Manual

Multi RC

Multi RC enables control of multiple TVs in a room without
any interference from each other's remote control.
To enable Multi RC, each remote control is set to one of
the four colors - Blue, Green, Yellow or Red. Each TV in the
room is separately programmed to a remote control of
one of those colors. In this way, each TV responds to only
one RC that is set to the same color as the TV itself. This
prevents interference from each other's remote control
when you watch multiple TVs in a room.
1
Press MENU on the setup remote control to display
the setup menu.
2
Select System.
3
Select MultiRC and the correct color code.
4
Press ÎïÍÆ to select [Select a color code].
•
The TV is configured to respond to the RC that is set to the
same color.
5
On the guest RC, press HOME (the menu button) and
the color button (same color as above) simultaneously,
for at least 5 seconds.
•
The guest RC is set to the selected color.
Note
•
The Guest RC defaults to Blue, and a remote which has been
set to any color can operate any TV which has not been
confi gured to a different color yet. Therefore, if 2 TVs are being
confi gured in the same space, then each TV/RC pair MUST
be set a their own color (one pair cannot be left as default,
otherwise both RCs will operate the TV which has not been
confi gured).
Watch your video on a USB storage
device
1
Connect your USB storage device to the TV.
2
Press MENU on the remote control to display the guest
menu.
3
Select Browse USB.
11