Display (Monitor) - HP Presario All-in-One CQ1-1000 - Desktop PC Getting Started Manual

Symptom Possible solution
Computer does Press and hold the On button until the computer turns off. Check Power Settings.
not turn off when
the On button is
pressed.
Computer shuts
●
down
●
automatically.

Display (monitor)

Symptom Possible solution
Screen is blank, Reconnect the power plug to the back of the monitor and to the wall outlet.
and monitor
power light is not
lit.
Press the On button on the monitor.
Screen is blank. Press the space bar on the keyboard or move the mouse to make the screen display
visible again.
Press the Sleep button (select models only), or the Esc key on the keyboard, to resume
from Sleep mode.
Press the On button to turn on the computer.
Inspect the monitor video connector for bent pins:
●
●
8 Chapter 3 Troubleshooting and maintenance
The computer might be in an exceedingly hot environment. Let it cool down.
Ensure that computer air vents are not blocked and that the internal fan is running
— see Keeping the computer free of dust, dirt, and heat on page 18. (Your
computer might not have an internal fan.)
If any of the pins are bent, replace the monitor connector cable.
If no pins are bent, reconnect the monitor connector cable to the computer.
ENWW