Wireless Switch Board - HP Pavilion dv9500 - Entertainment Notebook PC Maintenance And Service Manual

Wireless switch board

Description
Wireless switch board (includes wireless switch board cable)
Before removing the wireless switch board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
d.
e.
f.
g.
Remove the wireless switch board:
1. Release the ZIF connector to which the wireless switch board cable is connected and disconnect
the wireless switch board cable (1) from the system board.
2. Remove the two silver Phillips PM2.5×5.0 screws (2) that secure the wireless switch board to the
base enclosure.
80 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive (see Hard drive on page
Optical drive (see Optical drive on page
Switch cover (see Switch cover on page
Keyboard (see Keyboard on page
Speaker assembly (see
Display assembly (see
Top cover (see Top cover on page
47).
52)
59)
61)
63)
Speaker assembly on page
Display assembly on page
75)
Spare part number
432991-001
66)
69)