2.
Remove the two Phillips PM2.5×8.0 screws that secure the display assembly to the computer.
3.
Turn the computer display-side up, with the front toward you.
4.
Open the computer to an upright position.
5.
Disconnect the following cables:
(1) Display panel cable
(2) Microphone cable
(3) Camera cable
6.
Remove the wireless antenna cables (4) from the routing channels in the top cover.
CAUTION:
the display assembly can result in damage to the display assembly and other computer
components.
7.
Remove the two Phillips PM2.5×8.0 screws (1) and the two silver Phillips PM2.5×5.0 screws (2)
that secure the display assembly to the computer.
70
Chapter 4 Removal and replacement procedures
Support the display assembly when removing the following screws. Failure to support