Configuring An Initial Console Password; Configuring An Initial Telnet Password; Configuring An Initial Ssh Password - HP BladeSystem bc2000 - Blade PC Installation Manual

Configuring an Initial Console Password

To configure an initial console password, type the following commands:
console> enable
console# configure
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line console
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password george
When initially logging onto the PC Blade Switch through a console session, type george at the password
prompt. When switching to Exec mode, type george at the password prompt.

Configuring an Initial Telnet Password

To configure an initial Telnet password, type the following commands:
console> enable
console# configure
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line telnet
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password bob
When initially logging onto the PC Blade Switch through a Telnet session, type bob at the password
prompt. When switching to Exec mode, type bob at the password prompt.

Configuring an Initial SSH Password

To configure an initial SSH password, type the following commands:
console> enable
console# configure
console(config)# ip ssh server
console(config)# line ssh
console(config-line)# login authentication default
ENWW Advanced Configuration 21