This section provides an introduction to the user interface, and includes the following topics:
■
Starting the Application
■
Understanding the Interface
■
Resetting the Device
■
Logging Off the Device
Starting the Application
This section contains information for starting the application.
To open the EWS application:
1. Open a Web browser.
2. Enter the device's IP address in the address bar and press
authentication home page will load.
✎
By default, the switch uses DHCP to get an IP address for an interface on each of the two default
VLANs. The VLAN you choose to manage the switch determines which IP address you must use
to access its interface.
HP PC Blade Switch Home
Embedded Web System User Guide
Getting Started
Enter
www.hp.com
. The HP PC Blade Switch
1
1-1