Defining Enable Passwords - HP BladeSystem bc2000 - Blade PC User Manual

Defining Enable Passwords

The Enable Password page sets a local password for a particular access level.
To enable passwords:
1. Click Management Security > Passwords > Enable Password. The Enable Password page
opens:
Enable Password
The Enable Password page contains the following fields:
❏
Level — Defines the access level associated with the enable password. Possible field
values are 1 and 15.
❏
Password — Defines the enable password.
❏
Confirm Password — Confirms the new enable password. The password appears in the
***** format.
2. Define the Level, Password, and Confirm Password fields.
3. Click
Embedded Web System User Guide
. The enable password is defined, and the device is updated.
www.hp.com
Configuring Device Security
4-21