Lenovo ThinkCentre A62 Deployment Manual page 90

Mapping network drive
The following table provides the policy settings for the mapping network drive
function.
Table 37. \mnd\Rescue and Recovery
Policy
UNC
User
PWD
Scheduler tasks
The following table provides the policy settings for the Scheduler tasks.
Table 38. \Scheduler\Tasks
Policy
DayOfMonth
DayOfWeek
Hour
Minute
Pre
PreParameters
Post
PostParameters
82
Rescue and Recovery 4.3 Deployment Guide
Description
UNC location for the mapped network drive (format \\server\share). Default: None.
Use mapdrv.exe /view command to create an encrypted value for this field. Default:
None.
Create default password for the mapped network drive. Default: none
Description
If the Scheduled Backup Mode is configured for Monthly, this allows selecting which
day of the month when scheduled backups should occur. Default: none.
If the Scheduled Backup Mode is configured for Weekly, this allows selecting which
day of the week when scheduled backups should occur. Default: none.
Select the hour when scheduled backups should occur. Valid values: 0–23. Default:
none.
Select the minute when scheduled backups should occur. Valid values: 0–59. Default:
none.
Command to run prior to the scheduled backup task. Include the full path to the file.
Default: none.
The parameters that passes the command that is run prior to the scheduled backup
task. Default: none.
Command to run after the scheduled backup task. Include the full path to the file.
Default: none.
The parameters that passes the command that is run after the scheduled backup task.
Default: none.