Lenovo ThinkCentre A62 Deployment Manual page 20

Using PowerQuest Drive Image based tools with Rescue and
Recovery
If the PowerQuest DeployCenter tool PQIMGCTR is installed in the following
location (X:\PQ), you can create and deploy an image with the Rescue and
Recovery program with the following scripts:
Minimum script files:
Image creation:
Image deployment:
12
Rescue and Recovery 4.3 Deployment Guide
Table 4. X:\PQ\RRUSAVE.TXT
Script language
SELECT DRIVE 1
SELECT PARTITION ALL
(Needed if you have a type 0x07 partition or
if you have multiple partitions in your
image.)
Store with compression high
Table 5. X:\PQ\RRDEPLY.TXT
Script language
SELECT DRIVE 1
DELETE ALL
SELECT FREESPACE FIRST
SELECT IMAGE ALL
RESTORE
Table 6. X:\PQ\PQIMGCTR / CMD=X:\PQ\RRUSAVE.TXT /MBI=1 / IMG=X:\IMAGE.PQI
Script language
SELECT DRIVE 1
X:\PQ\PQIMGCTR
/CMD=X:\PQ\RRUSAVE.TXT
/MBI=1
/IMG=X:\IMAGE.PQI
Table 7. X:\PQ\PQIMGCTR / CMD=X:\PQ\RRDEPLY.TXT /MBI=1 / IMG=X:\IMAGE.PQI
Script language
SELECT DRIVE 1
X:\PQ\PQIMGCTR
/CMD=X:\PQ\RRDEPLY.TXT
/MBR=1
/IMG=X:\IMAGE.PQI
Result
Selects the first hard disk drive.
Selects all partitions.
Stores the image.
Result
Selects the first hard disk drive.
Deletes all partitions.
Selects first free space.
Selects all partitions in image.
Restores the image.
Result
Selects the first hard disk drive.
Creates the image program.
PowerQuest script file.
Captures the Rescue and Recovery Boot
Manager.
Creates the image file.
Result
Selects first hard disk drive.
Creates the image program.
Creates the PowerQuest script file.
Restores the Rescue and Recovery Boot
Manager.
Creates the image file.