Lenovo ThinkCentre A62 Deployment Manual page 50

E-mail
The Rescue and Recovery program provides support for Web-based e-mail through
the Opera browser. Opera provides IMAP-based e-mail which can be enabled
through the large enterprise configuration, but is not supported. To get the
reference information on how to enable, read the System Administrator's Handbook
at:
http://www.opera.com/support/mastering/sysadmin/
Disabling the address bar
To disable the address bar in Opera, complete the following procedure:
1. Get the file MINIMAL_TOOLBAR(1).INI from C:\PREBOOT\OPERA\
2. Open the file for editing.
3. Locate the [Document Toolbar] section of the file.
4. Locate the "Address0" entry.
5. Place a semicolon (; - a comment delimiter) in front of the "Address0" entry.
6. Locate the following entries and then place a semicolon in front of each:
7. Save the file.
8. Put the file by using the RRUTIL process as described in "Using RRUTIL.EXE"
Customizing bookmarks
The Opera browser is configured to read the bookmarks established in this
ramdrive file: Z:\OPERADEF6.ADR. This file is generated when the Rescue and
Recovery program is started from code in the startup routine. The startup routine
automatically imports Windows Internet Explorer bookmarks and adds some
additional bookmarks. Because the ramdrive file that is generated on startup is not
permanent, it adds bookmarks to Internet Explorer, which is automatically
imported when the Rescue and Recovery environment is started.
You can exclude some or all of the Internet Explorer favorites. To exclude specific
Windows users' favorites do the following:
1. Get C:\PREBOOT\STARTUP\OPERA_010.CMD by using the RRUTIL process
2. Open the file for editing.
3. Locate the following line in the .CMD file: PYTHON.EXE.FAVS.PYC
4. At the end of this line of code, type in quotations the names of the Windows
5. Save the file.
6. Put the file back by using the RRUTIL process described in "Using
If you do not want any of the Internet Explorer favorites to be displayed in the
browser provided in the Rescue and Recovery environment, complete the
following steps:
42
Rescue and Recovery 4.3 Deployment Guide
PROFILE\TOOLBAR by using the RRUTIL process described in "Using
RRUTIL.EXE" on page 30.
Note: Stopping here and continuing to step 7 disables the Opera toolbar, but
leaves a nonfunctional Go button and toolbar graphic. To remove the Go button
and the toolbar, continue with step 6.
Button1, 21197=Go Zoom2
on page 30. The address bar is disabled when Opera runs.
described in "Using RRUTIL.EXE" on page 30.
Z:\OPERADEF6.ADR
users whose favorites you want to exclude. For example, if you want to
exclude the favorites for All Users and Administrator, enter the following:
python.exe favs.pyc z:\Operadef6.adr "All Users, Administrator"
RRUTIL.EXE" on page 30.