Table of Contents
Advertisement
WPS Button Connection
The WPS (Wi-Fi Protected Setup) button is a standard for
easy and secure wireless network set up and connections. To
use WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS
can automatically set up a random network name and WPA
wireless security for wireless Wi-Fi phones, routers, access
points, computers, adapters, and other electronic devices.
WPS allows you to push buttons instead of entering a
network name and wireless security PIN.
1. From the Home screen, tap
Wireless and network
2. Tap WPS button connection.
3. Press the WPS button on your Wi-Fi access point within
2 minutes.
Auto connect
The Auto connect option allows you to be automatically
connected to an AT&T Wi-Fi Hotspot as soon as your phone
detects it.
1. From the Home screen, tap
Wireless and network
2. Tap Auto connect to create a check mark.
104
Settings
Wi-Fi settings.
Settings
Wi-Fi settings.
Auto connect is enabled.
Wi-Fi networks
All Wi-Fi networks that your phone can recognize are
displayed.
1. From the Home screen, tap
Wireless and network
2. Tap a network that you want to connect to.
3. Tap Connect.
4. Enter the Password if required.
Adding a Wi-Fi network
If a desired Wi-Fi network is not displayed in the Wi-Fi
networks list, you can manually add it.
1. From the Home screen, tap
Wireless and network
2. Scroll to the bottom of the menu and tap Add Wi-Fi
network.
3. Enter the Network SSID and Security information and
tap Save.
Activating Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
Settings
Wi-Fi settings.
Settings
Wi-Fi settings.
Advertisement
Table of Contents
