Sending Contacts Via Bluetooth - Samsung SGH-I827 User Manual

Hide thumbs Also See for SGH-I827:
Table of Contents

Advertisement

Disconnecting a paired device
Disconnecting a paired device breaks the connection
between the device and your phone, but retains the
knowledge of the pairing. At a later point when you wish to
reconnect the device, there is no need to setup the
connection information again.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap the previously
paired device (from the bottom of the page).
3. Tap OK to confirm disconnection.
– or –
From the Bluetooth settings page, touch and hold the
name of the previously paired device, and select
Disconnect.
Note: Disconnections are manually done but often occur
automatically if the paired device goes out of range of
your phone or it is powered off.
144
Deleting a paired device (unpair)
Deleting a device from your list removes its "connection
record" and upon reconnection would require that you re-
enter all the previous pairing information.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, touch and hold the
name of the previously paired device (from the bottom
of the page). This opens the connected device's menu
options.
3. Tap Unpair to delete the paired device.

Sending Contacts via Bluetooth

Depending on your paired devices' settings and capabilities,
you may be able to send pictures, Contact information, or
other items using a Bluetooth connection.
Note: Prior to using this feature, Bluetooth must first be
enabled, and the recipient's device must be visible.
1. Verify your Bluetooth is active.
2. From the main Home screen, tap Contacts
3. Press
Import/Export
.
Send namecard via.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Galaxy appealGalaxy appeal

Table of Contents