Asus P2B98-XV User Manual page 29

III. INSTALLATION
12. Wake-On-LAN Connector (3-pin WOL_CON)
These connector connects to LAN cards with a Wake-On-LAN output, such as
the ASUS PCI-L101 (see ASUS LAN Card section). The connector powers up
the system when a wakeup packet or signal is received through the LAN card.
IMPORTANT: This feature requires that the Wake-On-LAN Power Up Con-
trol is set to Enabled (see Power Management Setup) and that your system has
an ATX power supply with at least 720mA +5V standby power.
P2B98-XV Wake-On-LAN Connector
13. SB-Link™ Connector (6-1 pin SBLINK)
Using Intel's PC-PCI and serialized IRQ protocols found in this motherboard's
AGPset, this connector allows Sound Blaster 16 compatibility to AWE64D (Digi-
tal) or other PCI audio cards, enabling users to play Real-mode DOS games and
multimedia applications. SB-Link acts as a bridge between the motherboard and
the PCI audio card by providing the DMA and IRQ signals present in the ISA
bus but not available on the PCI bus.
P2B98-XV SB-Link™ Connector
ASUS P2B98-XV User's Manual
PME
Ground
+5 Volt Standby
IMPORTANT: Requires an ATX power
supply with at least 720mA +5-volt
standby power
1
PC/PCI Grant Sideband Signal
PC/PCI Request Sideband Signal
DGND
5
DMA_HEADER
NOTE: Pin 3 is removed to ensure the
correct orientation of the cable on it.
2
DGND
Serial IRQ
6
29