Asus P2B98-XV User Manual page 20

The ASUS P2B98-XV As Shipped
The ASUS P2B98-XV is shipped with the attach mount bridges already installed.
Installing the Pentium II Processor
1. Mount the Pentium II Retention Mechanism: The retention mechanism is
designed to fit into the SEC slot only one way. Be sure to align the notch in the
mechanism with the small rib on one side of the slot and that the mechanism is
properly seated on the board. Then, screw the captive nuts in place.
the mechanism's lock holes toward the motherboard's chipset (see motherboard
layout for the location of the Intel 440BX AGPset).
WARNING! Do not overtighten the captive nuts. Doing so could damage your
motherboard. Tighten captive nuts to no more than 6±1 inch/pound.
Captive nut
20
III. INSTALLATION
SEC slot for the
Pentium II processor
NOTE: Encircled items are points where the
attach mount bridges are factory-installed
ASUS P2B98-XV User's Manual
TIP:
Lock holes
Captive nut
Orient