Jumpers - Asus P2B98-XV User Manual

III. INSTALLATION

1. Jumpers

1. Clear Real Time Clock (RTC) RAM (CLRTC)
The CMOS RAM is powered by the onboard button cell battery. To clear the
RTC data: (1) Turn off your computer and uplug its AC power, (2) Short the two
solder points labeled CLRTC, (3) Turn on your computer, (4) Hold down <De-
lete> during bootup and enter BIOS setup to re-enter user preferences.
P2B98-XV Real Time Clock RAM (CLRTC)
2. VGA Interrupt Selection (INT)
These jumpers allow you to set the VGA interrupt method. The default disables
the chipset's internal interrupt routing. Some video capture cards may require
that the interrupt be assigned by the onboard chipset.
P2B98-XV VGA Interrupt
ASUS P2B98-XV User's Manual
Short the solder points to clear CMOS
INT INT
1 1
2 2
3 3
Enabled Disabled
13