Kyocera TASKalfa 2420w Operation Manual page 54

2. The following window will open up
3. From this list of jobs that are saved in the History list choose the desired job to reprint. The chosen
job will be loaded into the selected job area and all prior settings will also be loaded.
4. At this point the selected job can be sent to the printer to be reprinted or files can be added to
it creating a new job. Additional settings may also be applied and/or changed.
5. The new job with all of its settings will be added to the Job History folder for latter use.
Modify Pens (Plot file setup)
Allows the user to apply and modify the settings of vector plot files. Users can override files' pen
table and screening information. Plot File Setup also lets the user apply borders; modify halftone
settings, dither patterns, and more (for more information see Advanced Settings above page 29).
This information is solely for use of Personnel and Authorized Dealers. No part of this publication may be copied, reproduced or
distributed in any form without express written permission from.
Request Operators Guide
2011.
- 49 -