5.6.
Explanation of Calcomp Setting Dialog Box
Click [Calcomp Settings] in Default Settings region to pop up "Calcomp Settings" window.
<Setting>
Input the name here if you will save the new Calcomp setting.
If you click on
, you can select any of existent Calcomp settings from the pull-down menu.
<Save>
Click on "Save" after inputting the name to save the new Calcomp setting.
<Delete>
Click on "Delete" to delete the existent Calcomp setting.
<Pen Setting>
The setting of each pen is indicated here.
This list is used when you check "Use custom setting".
Pen No.
Pen Numbers are indicated. (From 1 to 255)
Width
The pen width decided by "Custom Setting" is indicated.
Gray
The gray ratio decided by "Custom Setting" is indicated.
34