Kyocera FS-C5350DN Advanced Operation Manual page 86

>>Sleep Timer
2-62
Sleep Timer (Sleep timer timeout time)
You can adjust the length of time the printer waits before entering Auto
Sleep in the absence of data.
The printer reverts to normal operation mode when the printer receives a
print job, the operation panel is operated, or one of the exterior covers is
opened. The default time is 30 minutes.
Note Color calibration is automatically executed before the
printer reverts to normal operation mode.
1
Press
2
Press
3
To change the timeout time, press [OK]. A blinking cursor (_)
appears.
030 min.
4
Press
and set the desired time. The timer can be set between 1 and 240
min. Use
5
Press [OK].
6
Press [MENU]. The display returns to Ready.
while >Timer > is displayed.
or repeatedly until >>Sleep Timer appears.
or to increase or decrease the value at the blinking cursor
and to move the cursor right and left.
Using the Operation Panel